Answered

Get reliable answers to your questions at Westonci.ca, where our knowledgeable community is always ready to help. Join our platform to connect with experts ready to provide precise answers to your questions in different areas. Our platform provides a seamless experience for finding reliable answers from a network of experienced professionals.

Pseudomonas putida is used for fermentation of the lactose present in cheese whey. The bacteria are cultivated in a steady-state chemostat with sterile feed and at a dilution rate of D = 0.28 h-1. The lactose concentration in the feed and the effluent are S0 = 2.0 g/L and S = 0.10 g/L, respectively. The following information is available: YX/S = 0.45 g X/g S, YX/O2 = 0.25 g X/g O2, and C* = 8 mg/l (saturation DO). a. Determine the steady-state biomass concentration (X) and the specific rate of oxygen consumption (go2) b. What should be the oxygen transfer coefficient (Kia) to overcome oxygen transfer limitations if the desired DO concentration in the fermentation medium is 2 mg/l?

Sagot :

ajeigbeibraheem

Answer:

Explanation:

Given that:

The dilution rate D = 0.28 h⁻¹

The concentration of lactose in the feed [tex]S_o = 2.0 \ g/L[/tex]

The effluent S = 0.10 g/L

Also;

[tex]Y_{X/S} = 0.45 g\ X/g \ S , \\ \\ Y_{X/O2 }= 0.25 g \ X/g \ O2, \\ \\[/tex]

Saturation C* = 8 mg/l

To calculate the steady-state biomass, we use the formula:

[tex]X = Y_{X/S}(S_o-S_e) \\ \\ X = 0.45(2.0 -0.10) \ g/L \\ \\ X= 0.45 (1.9) \ g/L \\ \\ X = 0.855\ g/L \\ \\ X = 855 \ mg/L[/tex]

The biomass is 0.855 g/L

For a steady-state condition, the oxygen uptake rate can be illustrated by using the formula:

[tex]q_{o_2}X =\dfrac{\mu_X}{Y_{X/O_2}}[/tex]

where;

[tex]\mu =[/tex] dilution rate (D)

Thus, the steady-state can be expressed as:

[tex]q_{o_2}X =\dfrac{D}{Y_{X/O_2}}[/tex]

[tex]q_{o_2}X =\dfrac{0.28}{0.25}[/tex]

[tex]q_{o_2}X =1.12 \ h^{-1}[/tex]

The specific rate of oxygen consumption [tex]q_{o_2}X =1.12 \ h^{-1}[/tex]

b)

In the fermentation medium, if the desired DO concentration [tex]C_L[/tex] = 2 mg/L

Here, the oxygen transfer is regarded as the rate-limiting step.

As such, the oxygen transfer rate(OTR) is equivalent to the oxygen uptake rate.

In this scenario, let's determine the oxygen transfer coefficient [tex](K_{La})[/tex] by using the formula:

[tex]OTR = K_{La}(C^* - C_L)[/tex]

where;

[tex]K_{La}[/tex]= coefficient of oxygen transfer

C* = saturation

Since [tex]OTR = q_{O_2}X[/tex]

[tex]q_{o2}X = K_{La}(C^*-C_L) \\\\ (1.12 )(855) = K_{La}(8-2) \\ \\ 957.6 = K_La (6) \\ \\ K_{La}= \dfrac{957.6}{6} \\ \\ K_{La} = 159.6 \ h^{-1}[/tex]

Thus, the oxygen transfer coefficient [tex]K_{La}[/tex] = 159.6 h⁻¹

Thank you for trusting us with your questions. We're here to help you find accurate answers quickly and efficiently. Thank you for choosing our platform. We're dedicated to providing the best answers for all your questions. Visit us again. Thank you for visiting Westonci.ca, your go-to source for reliable answers. Come back soon for more expert insights.