Answered

Find the best answers to your questions at Westonci.ca, where experts and enthusiasts provide accurate, reliable information. Explore thousands of questions and answers from a knowledgeable community of experts on our user-friendly platform. Our platform provides a seamless experience for finding reliable answers from a network of experienced professionals.

The propeller shaft of the submarine experiences both torsional and axial loads. Draw Mohr's Circle for a stress element on the outside surface of the solid shaft. Determine the principal stresses, the maximum in-plane shear stress and average normal stress using Mohr's Circle.

Sagot :

batolisis

Answer: Attached below is the missing detail and Mohr's circle.

i) б1 =  9.6 Ksi

б2 = -10.7 ksi

ii) 10.2 Ksi

iii)  -0.51Ksi

Explanation:

First step :

direct compressive stress on shaft

бd = P / π/4 * d^2

      = -20 / 0.785 * 5^2  = -1.09 Ksi

shear stress at the outer surface due to torsion

ζ = 16*T / πd^3

  = (16 * 250 ) / π * 5^3  = 010.19 Ksi

Calculate the Principal stress, maximum in-plane shear stress and average normal stress

Using Mohr's circle ( attached below )

i) principal stresses:

б1 = 4.8 cm * 2 = 9.6 Ksi

б2 = -5.35 cm * 2 = -10.7 ksi

ii) maximum in-plane shear stress

ζ  = radius of Mohr's circle

   = 5.1 cm = 10.2 Ksi   ( Given that ; 1 cm = 2Ksi )

iii) average normal stress

 = 9.6 + ( - 10.7 ) / 2

  = -0.51Ksi

View image batolisis
View image batolisis
Thank you for choosing our service. We're dedicated to providing the best answers for all your questions. Visit us again. We hope our answers were useful. Return anytime for more information and answers to any other questions you have. Westonci.ca is your trusted source for answers. Visit us again to find more information on diverse topics.