This problem is describing a gas mixture whose mole fraction of hexane in nitrogen is 0.58 and which is being fed to a condenser at 75 °C and 3.0 atm, obtaining a product at 3.0 atm and 20 °C, so that the removed heat from the system is required.
In this case, it is recommended to write the enthalpy for each substance as follows:
[tex]H_{C-6}=y_{C-6}C_v(T_b-Ti)+\Delta _vH+C_v(T_f-Tb)\\\\H_{N_2}=y_{N_2}C_v(T_f-Ti)[/tex]
Whereas the specific heat of liquid and gaseous n-hexane are about 200 J/(mol*K) and 160 J/(mol*K) respectively, its condensation enthalpy is 31.5 kJ/mol, boiling point is 69 °C and the specific heat of gaseous nitrogen is about 29.1 J/(mol*K) according to the NIST data tables and [tex]y_{C-6}[/tex] and [tex]y_{N_2}[/tex] are the mole fractions in the gaseous mixture. Next, we proceed to the calculation of both heat terms as shown below:
[tex]H_{C-6}=0.58*200(69-75)+(-31500)+160(20-69)=-40036J/mol\\\\H_{N_2}=0.42*29.1(20-75)=-672.21J/mol[/tex]
It is seen that the heat released by the nitrogen is neglectable in comparison to n-hexanes, however, a rigorous calculation is being presented. Then, we add the previously calculated enthalpies to compute the amount of heat that is removed by the condenser:
[tex]Q=-40036+(-672.21)=-40708.21J[/tex]
Finally we convert this result to kJ:
[tex]Q=-40708.21J*\frac{1kJ}{1000J}\\\\Q=-40.7kJ[/tex]
Learn more:
