Westonci.ca is the trusted Q&A platform where you can get reliable answers from a community of knowledgeable contributors. Our platform provides a seamless experience for finding reliable answers from a network of experienced professionals. Discover in-depth answers to your questions from a wide network of professionals on our user-friendly Q&A platform.
Part B
Next, you'll test your hypothesis from part A by examining the reaction times of vinegar and baking
soda in water at four different temperatures. You'll carry out the reaction using water at room
temperature (about 25°C), 40°C, 60°C, and 80°C. Make sure that you use the same amounts of
vinegar and baking soda for all three three trials.
Gather all the materials, and perform these steps for each trial:
1. Heat at least cup (60 milliliters) of water to the required temperature (refer to the data
table). Water may be heated on a stove, on a hot plate, or in a microwave oven.
2. Measure and record the actual temperature of the water.
3. Measure 1 tablespoon (15 milliliters) of the water into the cup.
4. Add teaspoon (1.5 grams) baking soda to the water, and stir until it is dissolved. The
solution will be clear.
5. Measure 1 tablespoon (15 milliliters) of vinegar, but do not pour it into the cup yet.
6. Very quickly, do all of the following:
a. Pour the measured vinegar into the cup.
b. Start the stopwatch.
c. Stir or carefully swirl the substances in the cup.
7. The chemical reaction will produce bubbles. You'll be able to see the bubbles and hear them
pop. Watch and listen for when the reaction stops. When it looks and sounds like it has it has finished stop the stop watch
8. Record the reaction time in the data table.
9. Discard the solution down the drain and rinse the cup
10. Repeat steps one through nine of this procedure doing three trials for each water temperature record the average temperature and reaction time of each set of the three trials. Read this math review to know how to calculate average of a data set.
