You have been hired by a homeowner to install a ceiling fan and light kit in a living room. The living room luminaire (light fixture) being used at present contains two 60-W lamps. After locating the circuit in the panel box, you find that the circuit is protected by a 15-A circuit breaker and is run with 14 AWG copper wire. After turning on all lights connected to this circuit, you have a current draw of 8.6 A and a voltage of 120 V. The ceiling fan light kit contains four 60-W lamps, and the fan has a maximum current draw of 1.6 A. Can this fan be connected to the existing living room circuit? Recall that a continuous-use circuit should not be loaded to more than 80% of its rated capacity.

Question

06-12-2022
Engineering

Answered

Welcome to Westonci.ca, where finding answers to your questions is made simple by our community of experts. Discover comprehensive solutions to your questions from a wide network of experts on our user-friendly platform. Experience the ease of finding precise answers to your questions from a knowledgeable community of experts.

You have been hired by a homeowner to install a ceiling fan and light kit in a living room. The living room luminaire (light fixture) being used at present contains two 60-W lamps. After locating the circuit in the panel box, you find that the circuit is protected by a 15-A circuit breaker and is run with 14 AWG copper wire. After turning on all lights connected to this circuit, you have a current draw of 8.6 A and a voltage of 120 V. The ceiling fan light kit contains four 60-W lamps, and the fan has a maximum current draw of 1.6 A. Can this fan be connected to the existing living room circuit? Recall that a continuous-use circuit should not be loaded to more than 80% of its rated capacity.

Sagot :

Thank you for visiting our platform. We hope you found the answers you were looking for. Come back anytime you need more information. We hope our answers were useful. Return anytime for more information and answers to any other questions you have. Thank you for visiting Westonci.ca. Stay informed by coming back for more detailed answers.

Which additional word in the sentence should be capitalized? I called mom on my cell phone from the gymnasium around six o'clock. A. Gymnasium B. Phone C. Cell

What is the equation of Line D? **I just need a bit of help, please walk me through it and show me how to do it, don't just give me the answer**

decrease £680 by 10% ?

Sound travels through sea water at a speed of about 1,500 meters per second. At this rate, how far will sound travel in 2 minutes?

Alexis uses toy blocks to build a building.each toy block is 1 cubic inch. The first three floors of the model are made up of 6 rows or 4 blocks. Floors 4- 8 ar

why is the 300 year period of time in Greece beginning around 1100 BC called the dark age

what percent is 608 million of 845 million

Which best describes the moon’s regolith? A.weathered rock and organic material B.dust and rocks C.water and small organisms D.ice and gas

after a large snowstorm you shovel 2000 kilograms of snow off your side walk in 1 hour. you lift the shovel to an average height of 1.25 meters while you are pi

Which situation requires the use of persuasive techniques? A. a report taking a stand about arts in public schools B. a report describing the nesting habits of

kumarravichandra kumarravichandra · Answer 1 · 2022-12-13T03:52:26-05:00

Thus, the living room circuit is overloaded.To connect the ceiling fan and light kit, the circuit breaker rating should be increased to 20 A Therefore, the fan cannot be connected to the existing living room circuit.

For a ceiling fan, all you need is a 15 amp breaker. This is so because ceiling fans, which fall into the same category as lights and outlets, consume a lot less electricity to function. Even though it will depend on what else is on the circuit, operating 4 ceiling fans simultaneously on a single 15 amp circuit shouldn't be an issue. A 52" fan may need 90 to 100 watts (at high speed) in addition to three 60 watt lights. That amounts to about 280 watts for each fixture. In other words, four of them would produce 1120 watts. Whether you are installing the fan and attaching electrical connections to it or changing out an existing light fixture, make sure that the circuit breaker is off before you begin.

Learn more about circuit here:

https://brainly.com/question/12608516

#SPJ4

Sagot :

Other Questions